TTM-C-LC3 Small Floor Type Cutting Machine Machine
Model | LC35M | LC50M | LC60M | LC35A | LC50A | LC60A |
Power | 1HP | 2HP | 3HP | 1HP | 2HP | 3HP |
Cutting capacity (mm) | MaxØ35mm 15Tx60L | MaxØ50mm 20Tx60L | MaxØ60mm 25Tx60L | MaxØ35mm 15Tx60L | MaxØ50mm 20Tx60L | MaxØ60mm 25Tx60L |
Cutting wheel | Ø230 mm | Ø230/255 mm | Ø230 mm | Ø230/255 mm | ||
Automatic feed speed | None | 1~200 mm/min | ||||
Manual / auto feed | Manual feed type , handwheel rotation | Pull-and-turn clutch switching hand-in-one type , manual can use hand wheel rotation or key movement , one-key start is used for automatic cutting, return to the original point after automatic cutting is completed, photoelectric induction cutting position control | ||||
Spindle speed | 2600 RPM (50Hz) | |||||
Cutting stroke | 230 mm | |||||
Standard cutting fixture | Two-seat quick push-pull vise , one for left and right hand operation | |||||
Fixture specifications | Maximum opening 60mm, jaw height 45mm, width 30mm, rear jaw with V -shaped groove | |||||
Vise traverse travel | Left and right vise can move independently 25mm laterally | Left and right vise can move independently 25mm laterally , the whole group of vise can move 30 mm laterally | ||||
Cooling device | 1/8HP-3φ, 50L | |||||
Lighting device | LED water-proof light | |||||
Dimensions | L 900*W 800*H 1300 mm | L 900*W 800*H 1300 mm | ||||
Weight (Kg) | 210 | 213 | 218 | 210 | 213 | 218 |
Power | 3Ø/AC220V/380V | |||||
Standard accessories | Wheel wrench 2 sticks, grinding wheel 2 film, cutting oil 3 liters
|