TTM-C-400A Auto Wheel Cutting
Specifications
Product Brief
Features
Special cooling system Large size cutting wheels and large workpieces require special cooling. The cutting wheels located on both sides of the cooling nozzles can be adjusted at any time by the spray coolant it possible near the workpiece of metallographic cutting machine, so as to achieve the optimum cooling effect. In addition, the metallographic sample preparation equipment also has two flexible water jets as supplementary cooling devices.
Diverse Cutting Methods
Y-axis and Z-axis cutting methods can bring you a variety of choices
The high speed cutting
Equipment is equipped with a fast vise clamp that not only can quickly grip the sample, but also durable. Side opening design can also cut long workpieces
Specifications
üMachine size: 1040x1600x1800 mm
üStandard cutting capacity: 130mm cutting wheel diameter 14 (400mm)
üSpindle speed: 2880RPM10HP three-phase motor
üT-slot table: 400mmx260mm, lateral movement 70mm
üY axis automatic feed control stroke 270mm, variable feed rate with straight Cutting, pulse, and intermittent three feed methods, feed rate adjustment range 0.01mm / secto5mm / sec
üZ axis travel distance 175mm manual control (optional automatic control)
üWater tank: 150L
Product Brief
üA large automatic cutting machine from Y-axis and Z-axis direction.
üThe side wall can be opened to cut extra long samples.
üThe powerful LED lamp provides clear lighting, with waterproof and explosion-proof high-brightness lighting.
üBuilt-in movable circulating cooling water tank
Features
Special cooling system Large size cutting wheels and large workpieces require special cooling. The cutting wheels located on both sides of the cooling nozzles can be adjusted at any time by the spray coolant it possible near the workpiece of metallographic cutting machine, so as to achieve the optimum cooling effect. In addition, the metallographic sample preparation equipment also has two flexible water jets as supplementary cooling devices.
Diverse Cutting Methods
Y-axis and Z-axis cutting methods can bring you a variety of choices
The high speed cutting
Equipment is equipped with a fast vise clamp that not only can quickly grip the sample, but also durable. Side opening design can also cut long workpieces