TTM-J0401 Impact Tester for Metal (Charpy)
Confirm to ASTM D256&E23, ISO179&180, EN 10045
It is suitable for metal material of large capacity impact tester. It used hammer once of swing impact specimen which broken was based on hammer of initial angle and after strike of angle to get hammer of loss energy which is material of impact energy value. This tester of feature is high precision, easy operation and the hammer will be auto return after finish impact. The test result can get from digital display and no need to complicate to calculation.
Confirm to ASTM D256&E23, ISO179&180, EN 10045
It is suitable for metal material of large capacity impact tester. It used hammer once of swing impact specimen which broken was based on hammer of initial angle and after strike of angle to get hammer of loss energy which is material of impact energy value. This tester of feature is high precision, easy operation and the hammer will be auto return after finish impact. The test result can get from digital display and no need to complicate to calculation.
uAutomatic pendulum returning device after test
uWith hammer electric brake system
uAuto display of impact energy value after test
uWith protection net to collect samples after test
| Model | TTM-J0401 | TTM-J0402 |
| Capacity | 100 J、150 J | 300J |
| Test Type | CHARPY | |
| Impact Speed | 5 m/sec ± 10％ | |
| Recommend Test Range | 10 ~ 90% of the pendulum Capacity | |
| Minimal Angle Display | 0. 05° | |
| Impact Angle | 150° | |
| Units Display | J、J/mm、J/cm、J/mm²、J/cm²、KJ/m²、Kg-cm、 Kg-cm/mm、Kg-cm/cm、ft-lb、ft-lb/in、ft-lb/in² |
|
| Power | Single Phase 220 V | |
| Dimensions (about) | 188 × 65 × 178 cm | 210 × 95 × 208 cm |
| Weight (about) | 710 kg | 900 kg |